James Arjuna writes:
> The spa has a 24 hour 56 frame circulation filtration pump. It does all the
> filtering and heating.
> What is the temperature, and are there any other problems? Do both of the
> jets operate correctly.
The temp is usually about 92F. There don't seem to be any other
problems besides the heat.
> If the pump on is off, not filtering, and the "jet one" is pressed once it
> goes to low? press again to high? Same on
> pump 2? How many speeds on the blower? How many intensities on the light?
> Do you have a ac volt meter?
Yup... push once, the #1 indicator blinks and the pumps are low, once more
it goes high. Same w/ #2. Only appears to be one speed on the air
bubbles and the light. Don't have a volt meter.
-e
> Jim
> "Erik W. Selberg" wrote:
>> Hiya,
>>
>> When I checked things this morning, the heater was on, but neither the
>> #1 or #2 pumps were on as far as I could tell. Doesn't look like
>> they're being activated when the temperature is below what the desired
>> temperature is. Economy is off. Filtering is on for two hours a day.
>>
>> Any ideas?
>>
>> -e
>> --
>> Erik Selberg
>> "I get by with a little help selberg@cs.washington.edu
>> from my friends." http://www.cs.washington.edu/homes/selberg
-- Erik Selberg "I get by with a little help selberg@cs.washington.edu from my friends." http://www.cs.washington.edu/homes/selberg
This archive was generated by hypermail 2b30 : Sun Sep 17 2000 - 03:14:41 PDT