Eric; The programming may be set incorrectly. You may have to call us
tomorrow when you are near the spa with a phone. The air will feel cool
when you are in direct contact with the air jet. Raise your hand a little
and it doesn't feel cool. We recommend running the jet pumps first to warm
up the cabinet a bit.
Set the filtering to 1 or two hours twice a day on pump one. The spa may be
set in "economy" mode. Press the arrow to the off position.
The Spa should be at 104. Is the 24 Hour pump running?
Jim
"Erik W. Selberg" wrote:
> Didn't use the spa today, but this AM it was 96 and when I got home
> this evening it was at 93. Seems that the water likes being right
> around the mid 90s here, although I do have it set for 104 and the
> heater does appear to be on.
>
> I also noticed that the air blower is blowing in cold air into the spa
> when we used it... which doesn't make sense for a thermal-sealed spa.
>
> Any ideas here?
>
> -e
> --
> Erik Selberg
> "I get by with a little help selberg@cs.washington.edu
> from my friends." http://www.cs.washington.edu/homes/selberg
This archive was generated by hypermail 2b30 : Sun Sep 17 2000 - 03:14:41 PDT